CatEye Bicycle Accessories - Manual

IMPORTANT NOTICE
ABOUT INSTALLATION
In order to make this model suitable for MTB, some of the parts have been changed.
When mounting to bicycle, follow the explanation written in this sheet, not the instruction
manual.
1. Installation (Instead of following the explanation in 11-12 pages of the instruction manual, follow the explanation below.)
Attach the sensor and the magnet properly so that their
positions meet the following conditions
A and B .
A Align the magnet’s center and the sensor’s
marking line while rotating the wheel.
B The clearance between the sensor and the
magnet should be less than 5mm.
1. Attach the sensor temporarily, with the adhesive tape, to
the inside of the right front fork (fig. 3).
2. Attach the magnet to the right side spoke of the front
wheel (fig. 4). Align the magnet’s center and the
sensor’s marking line (fig. 1).
3. Adjust the position of the sensor so that the clearance
between the sensor and the magnet is less than 5mm
(fig. 2). Fix the sensor with the nylon ties (fig.5). Cut off
the excess.
4. Secure the wire along the fork with the nylon ties (fig. 6),
and along the outer cable with the spiral tube. Allow
enough wire clearance in the area marked with
.
5. Apply the bracket rubber pad to the bracket, and fix the
bracket near the handlebar stem.(fig.7)
Main Unit
Slide the main unit from front until it clicks into position.
The contact is automatically connected. To remove, slide
it while pushing the lever (fig. 8).
Test
Install the main unit onto the bracket. Spin the front wheel
and see if the speed appears in the display. If not, re-adjust
the position of the sensor and the magnet so that it meets
the conditions
A and B in the “ IMPORTANT ” column.
IMPORTANT
marking line
Fig.1 Fig.2
front fork
magnet’s center
magnet
sensor
sensor
spoke
magnet
adhesive tape
bracket
sensor
nylon tie
spiral tube
slide
front
lever
bracket
Fig.5
Fig.3 Fig.4
Fig.6
Fig.7
Fig.8
Parts
1 Bracket
2 Wire
3 Sensor
4 Magnet
5 Bracket Rubber Pad (2 pcs.)
6 Nylon Tie (5 pcs.)
7 Spiral Tube
8 Lithium Battery CR2032
1
2
3
4 5 6
7
8
E
rubber pad
less than 5mm
front fork
front fork
nylon tie
nylon tie
A B
Copyright© 2001 CAT EYE Co.,Ltd.
CCMAT1-010417 1 Printed in Japan
066600110
#169-9730N Heavy Duty Wire and Bracket Sensor Kit
Kit de Fil Renforce et Supports d´Unité Principale et de Détecteur
Nachrüstset mit Halterung, Sensor und verstärktem Sensorkabel
Filo Ultra Resistente e Attacco Completo
Kit Soporte del Sensor y Alambre de Servicio Pesado
Extra sterke kabel en bracket sensor set
#169-6560N[#169-6565N] Bracket Sensor Kit [Long]
Kit de montage de l'unité principale et du détecteur [Longs]
Halterung und Sensorkabel [Lang]
Kit supporto unità principale e sensore [Lunghi]
Kit Soporte del Sensor [Largo]
bracket sensor kit
#169-6567[#169-6562] Center Mount Bracket Kit [Long]
Kit de montage central de l'unité principale [Longs]
Halterung für Montage an der Lenkermitte [Lang]
Kit di montaggio al centro del manubrio [Lunghi]
Kit Soporte para Montaje Central [Largo]
centrum bevestigings bracket kit
#169-6569 Stem Mount Bracket Kit
Kit de montage de l'unité principale sur la broche du guidon
Halterung für Montage an der Lenkerstange
Kit di montaggio sull'attacco manubrio
Kit Soporte para Montaje en Tija
stuurpen bevestigings bracket kit
#169-9752 Attachment Kit
Kit de Fixation
Befestigungsmaterial
Guarnizioni in gomma per il montaggio
Kit de Accesorios
bevestigings kit
#169-9691 Wheel Magnet
Aimant de Roue
Radmagnet
Magnete per ruota
Imán de Rueda
wielmagneet
#169-9835 Wrist Band
Bracelet
Handgelenkband
Supporto a bracciale per la sola funzione di altimetro
Correa de Muñeca
polsband
#169-9860 Main Unit Holder
Etui pour unité principale
Hauptgeräthalterung
Custodia dell'unità principale
Soporte de Unidad Principal
computer houder
#169-9880 Altitude Sensor Cover/Filter
Couvercle du Détecteur d'Altitude/Filtre
Höhensensordeckel / Filter
Protezione del filtro e del sensore dell'altitudine
Tapa del Sensor de Altitud/Filtro
hoogtesensor deksel / filter
#166-5155 Lithium Battery (CR2032)
Pile au lithium (CR2032)
Lithiumbatterie (CR2023)
Batteria al litio (CR2032)
Batería de Litio (CR2032)
Lithium batterij (CR2032)
2-8-25, Kuwazu, Higashi Sumiyoshi-ku,
Osaka 546-0041 Japan
e-mail: [email protected]
URL: http://www.cateye.com
CO.,LTD.
SPARE ACCESSORIESSPARE ACCESSORIES