2 board led indicators – DSS Networks 5161 User Manual
Page 8
GigMAC PMC and PCI
Board and Driver Users Manual
6.2 BOARD LED INDICATORS
PCI / PMC Boards LED Function Table
Gigabit NIC
Model
LED # 1
Green
LED # 2
Green
LED #3
Yellow
LED #4
Yellow
LED #5
Yellow
LED #6
Yellow
PCI 6161
TX
RX
Quality
Duplex
1000
100
PCI 6167
TX
RX
Quality
Duplex
1000
100
PCI-X 6162
TX
RX
1000
100
N/A
N/A
PMC 5164
ACT
ACT
ACT
ACT
N/A
N/A
PMC 5161
TX
RX
10
100
1000
FD
PMC 7160
TX
RX
Link
SD
N/A
N/A
PMC 5162
TX
RX
1000
100
N/A
N/A
Models 5161, 6161 and 6167 with RJ-45 connector
The front panel has onboard RJ-45 connectors that supports the connection of
Category 5 cabling with 6 LED indicators that provide the following as marked
with silkscreen nomenclature on front panels:
Three of the Yellow LEDs are used to indicate the link status and port speed
option: 10 Mb, 100 Mb (Fast Ethernet), and 1000 Mb (Gigabit Ethernet) modes.
The illuminated LED indicated that the link is up and established at the speed
indicated.
One yellow LED indicates Full-Duplex status if illuminated, else half-duplex.
The remaining two Green LEDs are used to indicate both transmit and receive
activity.
LED SUMMARY
Speed Link Activity Indicators
10 Mbps LED glows solid yellow
when link is detected
100 Mbps LED glows solid yellow
when link is detected
1000 Mbps LED glows solid yellow
when link is detected
Full-Duplex Link Activity Indicator
DSS NETWORKS, INC.
Version: 2.0
Page: 8