EFCO 8750XD - Manual (Page 18)

EFCO 2012 Page 18
Series 8750XD Unitized Curtain Wall Installation Instructions
26. Finish installing starter sill sections as previously described until the installation is completed.
27. Push Stack Gasket WEA2 into gasket reglet beginning at one jamb condition and continuing to next jamb condition. Gasket should run continuously through
all corners and splices. Ensure that the gasket is not stretched while performing this task. See Figures 21 and 22.
28. Installation of the Static Starter Sill is now complete.
Section 3 - Static Starter Sill Preparation and Installation
FM45 Static Loading Clip
FM46 and FM47
Static Starter Sill
Stack Gasket WEA2
Figure 21
Figure 22
FM46 and FM47
FM45 Static Loading Clips