EFCO 8750XD - Manual (Page 20)

EFCO 2012 Page 20
Series 8750XD Unitized Curtain Wall Installation Instructions
2. Dynamic loading Clip Assembly:
a. Assemble the dynamic loading clips by attaching the anchor bar to the loading clip base with (6) STB1 fasteners. Anchors may come to the field
preassembled, depending on project requirements. Refer to the final shop drawings for project specific information.
b. Offset dynamic loading clips be required at the jamb conditions. Outside and inside corner conditions will require different dynamic loading clips.
Section 4 - Dynamic Starter Sill Preparation and Installation
Anchor bar
Dynamic
loading clip
base
Figure 28
STB1(6)
90° Outside
Corner (KV30)
90° Inside
Corner (KV29)
Left Jamb
(KV26)
Right Jamb
(KV28)
Mullion
(KV25)
Figure 33
Figure 32
Figure 31
Figure 30
Figure 29
Figure 34