EFCO 403 Series Roto Vent for Storefront - Manual (Page 9)

of the roto-vent sill member’s location.
for all pocket fillers is 6 1/8". Locate the pocket filler 1" from the bottom
Select the correct pocket filler for the system being used. The cut length STEP 3)
CUT LENGTH
6 1/8" POCKET FILLER
THE GLASS STOPS
8 7/16" SIGHTLINE INCLUDING
CUT LENGTH
6 1/8" POCKET FILLER
THE GLASS STOPS
8 7/16" SIGHTLINE INCLUDING
CUT LENGTH
6 1/8" POCKET FILLER
CONT.
ATTACHMENT
PAGE 8
1 5/16"
1"
THE GLASS STOPS
8.000" SIGHTLINE INCLUDING
7/8"
1"
1 5/16"
FILLER FOR
401 SYSTEM
#9151 POCKET
1"
#9251 POCKET
FILLER FOR
402 SYSTEM
SECTION V -
#9351 POCKET
FILLER FOR
403 SYSTEM
PART PREPARATION &