Glass pockets & setting blocks, Identification of glass pockets and setting blocks, Includes offset and center-set glazing) – EFCO 433 Series User Manual
Page 73: Inside glazed horizontals, Fig. 69, Fig. 70] [fig. 71, Fig. 72, Fig. 74] [fig. 73, Inside glazed sills
Advertising
June 2012
PART NO. Y017
Page 73 of 90
Series 433 Triple Set Installation Instructions
SECTION IX: Glazing
(Includes Offset and Center-Set Glazing)
INSIDE GLAZED HORIZONTALS
IDENTIFICATION OF GLASS POCKETS AND SETTING BLOCKS
[FIG. 69]
8363
8366
8372
8365
8364
8367
8368
[FIG. 70]
[FIG. 71]
8362
[FIG. 72]
8362
8375
HN32
[FIG. 74]
[FIG. 73]
HN92
HN92
INSIDE GLAZED SILLS
HN92
HN32
HN32
4 ½” SILLS &
HORIZONTALS
SIMILAR
Customer / Installer Note:
EFCO setting blocks are typically 4" in length with
different depths. If the glazing infill is "NOT BY EFCO"
and glazing sizes are larger than 40 square feet, then
the glazing details must be reviewed by the glazing
manufacturer for proper setting block size.
Advertising