Identification of glass pockets and setting blocks, Includes offset and center-set glazing), Fig. 77] [fig. 76 – EFCO 433 Series User Manual
Page 74: Fig. 75, Fig. 81, Fig. 79, Fig. 78] [fig. 82
June 2012
PART NO. Y017
Page 74 of 90
Series 433 Triple Set Installation Instructions
SECTION IX: Glazing
(Includes Offset and Center-Set Glazing)
OUTSIDE GLAZED SILLS
[FIG. 80]
OUTSIDE GLAZED HORIZONTALS
HN92
[FIG. 77]
[FIG. 76]
8372
8368
[FIG. 75]
8364
8366
8367
8363
8365
[FIG. 81]
8375
HN32
8362
HN32
[FIG. 79]
8362
IDENTIFICATION OF GLASS POCKETS AND SETTING BLOCKS
8384
8382
HN92
HN32
HN92
HN92
8386
8365
8385
[FIG. 78]
[FIG. 82]
HN32
4 ½” SILLS &
HORIZONTALS
SIMILAR
Customer / Installer Note:
EFCO setting blocks are typically 4" in length with
different depths. If the glazing infill is "NOT BY EFCO"
and glazing sizes are larger than 40 square feet, then
the glazing details must be reviewed by the glazing
manufacturer for proper setting block size.