ETS-Lindgren 3303 Monopole Antennas - Manual (Page 6)

Standard Configuration
A NTENNA B ASE
• Type N connector
• Built-in manual band switch
• Drilled to accept ETS-Lindgren or other tripod
mount with standard 1/4–20 threads
C OUNTERPOISE
60 centimeters (not shown)
M ONOPOLE E LEMENT
The monopole element includes these parts for assembly:
• (1) 116474 Rod section without antenna adapter
• (1) 116474 Rod section with antenna adapter
• (1) 116862 Center section
The monopole may be assembled as follows:
• For a finished length of 40.95 in (1040 mm)—Assemble all
parts, including the 116862 center section.
• For a finished length of 39.37 in (1000 mm)—Assemble all
parts except for the 116862 center section.
See page 17 for the steps to assemble the monopole.
6 | Introduction