ETS-Lindgren 3850-2 LISN - Manual (Page 7)

Introduction | 7
1.0 Introduction
The ETS-Lindgren
Model 3850/2 Line
Impedance Stabilization
Network (LISN) is a
two-channel low pass filter
network used for
conducted emissions
measurement.
The Model 3850/2 is designed to isolate the equipment under test from an
external power source while steering any radio frequency signals from the power
line to a 50-ohm port. The conducted emissions measurements may be made in
accordance with regulatory compliance standards.
ETS-Lindgren Product Information Bulletin
See the ETS-Lindgren Product Information Bulletin included with your shipment
for the following:
• Warranty information
• Safety, regulatory, and other product marking information
• Steps to receive your shipment
• Steps to return a component for service
• ETS-Lindgren calibration service
• ETS-Lindgren contact information