ETS-Lindgren 1052 Antenna Tower Positioner User Manual
Page 19
Advertising
![background image](/manuals/636254/19/background.png)
Assembly Instructions
| 19
6. Move rope clamp from shipping wire to rope.
• Remove the four bolts from the rope clamp to separate the two pieces.
• About two inches above where the rope is secured at the boom brackets,
place one piece of the rope clamp on each side of the rope.
• To clamp the rope, re-attach the two pieces with the four bolts.
7. Attach
boom—Insert the boom through the boom brackets on the carrier
with the cable guide oriented towards the back.
Advertising