ETS-Lindgren HI-6153 Electric Field Probe - Manual (Page 107)

Operating Protocols | 107
Probe
Command
Description Probe Response
TF Read temperature in
Fahrenheit :Txxxx.<CR>
< Null >< CR > Send the ASCII null
character
:N<CR>
<Null><CR> is a special command that can be used as the initial
command to the probe
after it is turned on.
HI-6113 L ASER D ATA I NTERFACE C OMMANDS
LDI
Command
Description Probe Response
i Laser data interface
identification string :i6113<sr><sn><CR>
 sr=10-character software
revision
 sn=8-character serial
number
n Read laser current :nx.xxx.<CR>
o Laser OFF command :o
The laser and all LEDs except
the green Power LED will turn
off
r Laser ON command :r
The blue Laser LED will
illuminate immediately, then the
yellow Receive LED will
illuminate a few seconds after,
indicating the probe is ready for
operation