ETS-Lindgren HI-6153 Electric Field Probe - Manual (Page 45)

Battery-Operated Field Probes | 45
5.0 Battery-Operated Field Probes
Before using your battery-operated probe, read the following:
HI-6053 Field Probe: Appendix B: Series H-491198-01 Battery
Charger
on page 85.
HI-6022 and HI-6005 Field Probe: Appendix C: Series H-491198-48
Battery Charger
on page 93.
To calibrate the probe prior to shipment, ETS-Lindgren also charges
the internal battery at the factory. Every effort is made to make sure
that the probe arrives ready to use, but you should verify the condition
of the battery prior to making any measurements.
The HI-60XX Series Field Probe is a battery-operated probe that utilizes
three orthogonal sensors to provide an isotropic reading of the electric field.
When requested, X, Y, Z, and total field data can be reported, making the
HI-60XX Series true 3-axis probes.
The HI-60XX Series uses either the HI-4413P Fiber Optic Modem or the
HI-4413USB Fiber Optic to USB Converter to communicate with ProbeView II™
software through a port on the computer. The HI-6100 Field Monitor may also be
used with the HI-60XX Series. For more information on readout options, see
page 12.