ETS-Lindgren 3301B Active Rod & Field Antenna (Archived) - Manual (Page 45)

European Community Declaration of Conformity | 45
Appendix B: European Community Declaration of Conformity
The EC Declaration of Conformity is the method by which EMC Test Systems, L.P.
declares that the equipment listed on this document complies with the EMC and Low-
voltage Directives.
Factory Issued by
EMC Test Systems, L.P. EMC Test Systems, L.P.
P.O. Box 80589 P.O. Box 80589
Austin, Texas USA 78708-0589 Austin, Texas USA 78708-0589
The products manufactured under the EMCO product name and listed below are eligible to
bear the EC Mark:
– Model 3301B Active Rod Antenna
– Part number 102615 Battery Charger
A PPLICABLE R EQUIREMENTS
Standard Criteria
EN61010-1
Safety requirements for electrical equipment for measurement, control
and laboratory use
EN60742/1989 Isolating transformers and safety isolating transformers
EN55022 Class B
IEC 801-2 Level 2 4/8kV
IEC 801-3 Level 2 3V/m
IEC 801-4 Level 2 .5 I/O, 1kV AC
A UTHORIZED S IGNATORIES
Bruce Butler, General Manager James C. Psencik, Engineering Mgr
Charles Garrison, Quality Assurance Date of Declaration: December 10, 1996
The authorizing signature on the EC Declaration of Conformity document authorizes
EMC Test Systems, L.P. to affix the CE mark to the indicated product. CE marks placed on
these products will be distinct and visible. Other marks or inscriptions liable to be confused
with the CE mark will not be affixed to these products. EMC Test Systems, L.P. has
ensured that appropriate documentation shall remain available on premises for inspection
and validation purposes for a period of no less than 10 years.
Archived 3/18/10