Operation, Assembly, Using the appliance – FARBERWARE 103743 5 Cup Coffee Maker User Manual
Page 8
8
9
OPERATION
CAUTION: During operation, the appliance produces hot steam. Keep clear of the
top of the appliance.
CAUTION: Never touch the keep warm plate (9) during use (ill.
l
) or remove
accessories when the appliance is plugged in and switched on.
CAUTION: Never use the appliance with the lid (3) open (ill.
m
).
Let the appliance cool completely.
•
Clean the appliance (
•
Cleaning).
Assembly
Place the appliance on a clean, flat and stable surface.
•
Open the lid
•
(3) and place the filter housing (14) in the appliance (ill.
a
).
NOTE: Ensure to align the filter housing (14) correctly (ill.
a
).
Place the permanent filter
•
(15) in the filter housing (14) (ill.
b
).
Assemble the charcoal filter holder
•
(1) and filter (2) (ill.
d
).
Place the charcoal filter holder
•
(1) in the water tank (5). Ensure it is placed in the
mounts (ill.
e
).
Close the lid
•
(3) (ill.
h
).
To disassemble, follow the above steps in reverse order.
•
Using the appliance
Use the appliance for brewing and keeping coffee warm.
NOTE: The appliance has a rated power of 650W. Before plugging it into the wall
outlet, ensure that the electrical circuit is not overloaded with other appliances. This
appliance should always be operated on a separate 120V ~ 60Hz wall outlet.
CAUTION: Always ensure there is water in the water tank (5) before using the
appliance. Do not use the appliance without water. Do not use hot water for
brewing. Do not overfill the water tank (5). Do not use the appliance without the
carafe (10), filter housing (14) or the permanent filter (15).
Assemble the appliance (
•
Assembly).
Add the required amount of ground coffee into the permanent filter
•
(15) using
the measuring scoop (16) (ill.
c
).
Place the charcoal filter holder
•
(1) in the water tank (5) (ill.
e
).
5-cup Coffee Maker_103743_IM_US_V2_121212.indd 8
12/12/12 3:53:20 PM