Fast Forward Video Micron HD - Manual (Page 16)

16 Micron HD Manual, Fast Forward Video, Inc
Update Firmware Menu (Continued)
DVR MASTER
Software is PC compatible with Windows XP, VISTA & Windows 7
1. Open the DVR Master program on your PC – this will scan for the appropriate COM
port and connect with the Micron. If this fails check all the connections and make
sure any necessary drivers have been downloaded.
2. Optional - Microsoft .NET Framework error message – just click CONTINUE.
3. On Micron select Firmware Update menu and confi rm upgrade by pressing the green
check mark – the unit will display “Perform Update”.
4. DVR Master will open – click on REV located in the lower right corner.
5. This will display the fi rmware and boot fi rmware rev dates – click UPDATE.
6. Browse and select the unzipped fud fi le.
7. The progression line will show fi rmware update %.
8. Update complete close program.
9. Cycle Micron HD power OFF then ON for update to take effect.
Allows you to adjust horizontal position of the video on your monitor.
NOTE: You must have recorded material in the unit in order to adjust the position.
1. From the LIVE Mode, press the STOP () button to enter the Main Menu.
2. Press any arrow to scroll to HORIZ SYNC POS MENU.
3. Press the STOP () button to select.
4. Press any arrow to scroll through various format options to select desired format.
5. Select your desired number.
• 1 - 63 advances output
• 64 is midpoint
• 65 - 128 delays output
6. Press the STOP () button to select the format desired. - The LCD will display
7. Press the REC ( X ) button to exit the Horiz Sync Pos menu.
8. Press the REC ( X ) button to exit the Main Menu.
Horiz Sync Pos Menu