Fast Forward Video Micron HD - Manual (Page 18)

18 Micron HD Manual, Fast Forward Video, Inc
Applic Confi g Menu (Continued)
BVW-75: Recording in BVW-75 mode allows you to record anywhere on the disk
regardless of whether or not it has previously recorded material. You
can begin recording by cueing to the point you wish to begin and press
NOTE: The disk MUST have space available to record the replace-
ment video and will delete the overwritten video when recording stops.
Also when using this personality you are unable to record in the Quick-
Time fi le format.
The main feature of this mode is the ability to insert edit material over
previously recorded material. The Micron HD, in BVW-75 mode as-
sumes that it has a 24 hour tape of “black” which has time code as-
signed from 00:00:00:00. If you were to tell the Micron HD to record a
10 second clip at 00:01:00:00 for 10 seconds, it would record this and
the machine would then assume it had 1 minute of black, 10 seconds
of video from the 1 minute time code mark, and then 23:58:50:00 of
black after this. If you want to record over this clip and add new in-
formation, it will insert the video at the same points and overwrite the
data on the drive in the same way, always maintaining the 24 hours of
time code as the master reference. Note: Play list functionality is NOT
available in BVW-75 mode.
NOTE: If you record material in BVW-75 mode, the Micron HD uses
the 24-hour time code as reference, which is still visible to the ma-
chine when you switch to Native mode.
Two Options here for fi le storage, Native and Quicktime.
Use this option when maximum fl exibility is required in On-Demand
Playback such as On-Air instant replay.
Use this option when you plan to move video data to some other
device that reads .MOV fi les
The Disk Format should be set to Native unless you're saving video
to Quicktime fi les, then you must use FAT 32 .
To set the confi guration settings in the Applic Confi g Menu -
1. From the LIVE Mode, press the STOP () button to enter the Main Menu.
2. Press any arrow to scroll to APPLIC CONFIG MENU.
3. Press the STOP () button to select.
4. Press any arrow to scroll through various format options to select desired format.
5. Press the STOP () button to select the format desired. - The LCD will display
6. Press the REC ( X ) button to exit the Applic Confi g menu.
7. Press the REC ( X ) button to exit the Main Menu.
FILE FORMAT:
DISK FORMAT:
NATIVE:
QUICKTIME: