Fast Forward Video Micron HD - Manual (Page 7)

7 Micron HD Manual, Fast Forward Video, Inc
Connections
• AES DIGITAL AUDIO IN x 2 = Input BNC connectors for one channel of AES audio.
Please note that when this connection is activated audio channels 1 & 2 of embed-
ded audio are eliminated.
• AES DIGITAL AUDIO OUT x 2 = Output BNC connectors for one channel of AES
audio.
• TIME CODE IN = Input BNC connectors for longitudinal time code.
• TIME CODE OUT = Output BNC connectors for longitudinal time code.
• RS-422= Machine Control (DB9 CONNECTOR) - This connector is for controlling
the deck or updating fi rmware from an external RS-422 device or PC (using RS-422
to RS-232 converter). Please note when using the RS-422 with a controller it is rec-
ommended to lock the front panel (see page 20 Lock Keypad).
• SD VIDEO IN = SD/HD-SDI input BNC connectors.
• SD VIDEO OUT = SD/HD-SDI output BNC connectors.
• REF INPUT = Use this connector for Genlock. The signal must conform to broadcast
specifi cations which is RS-170 for NTSC. Composite video or black burst are ac-
ceptable. DO NOT connect non-standard signals to the Micron, or the picture WILL
distort.
DB-9 Pin # RS-422 Cont. Signal Name
1 Ground
2 TX Out-
3 RX In +
4 Transmit Common
5 Spare
6 Receive Common
7 TX Out +
8 RX In -
9 Ground
5 4 3 2 1
9 8 7 6