General Hydroponics WaterFarm - Manual (Page 4)

ASSEMBLY
STEP 4
Push the beveled end of the Pumping
Column Support Tube into the large hole
in the bottom of the Growing Chamber.
Push the Pumping Column Support Tube
down until it barely touches the bottom
of the Reservoir.
STEP 5
Attach the Drip Ring to the end the
Pumping Column Assembly. Ensure that
the holes in the ring itself are facing
downwards.
STEP 6
Push the entire Drip Ring
Assembly down into the
Pumping Column Support
Tube. Being careful not to
catch the tube clamps on
the support tube. Push the
assembly into the tube until it
barely touches the bottom of
the reservoir.