Tools required for installation, Parts – Chief Manufacturing PSH-2000 User Manual
Page 3
Installation Instructions
Model: PSH-2000
3
TOOLS REQUIRED FOR INSTALLATION
•
Drill and 7/32" drill bit
•
13mm wrench
•
1/2" wrench
•
Phillips screwdriver, #2
•
M5 Hex Key (provided)
•
3/16" Hex Key (provided)
•
5/32" Hex Key (provided)
NOTE: Other tools may be required depending on your
method of installation.
PARTS
Unpack carton, inspect and verify contents
(See Figure 1). Read installation instructions completely.
If any listed parts are missing or damaged, contact Chief
Customer Service at 1-800-582-6480.
Table 1: Parts
Item
Description
Qty
10
PLATE, Wall
2
20
BRACKET, Static
2
30
BRACKET, Side Support
2
40
LATCH
2
50
SPACER, 0.194" ID x 0.375" OD x 0.032"
8
60
SCREW, Button Head Cap, 10-24 x 1/2"
8
70
SCREW, Phillips Pan Machine, 10-24 x 1-1/2"
2
80
SCREW, Button Head Cap, M8-1.25 x 25mm
6
90
BUTTON, Mounting
6
100
WASHER, Flat, Machine, M8
6
110
WASHER, Lock, Split, M8
6
120
NUT, Hex, Finished Standard, M8
6
130
SCREW, Button Head Cap, 5/16"-18 x 1/2"
24
140
KEY, Hex, M5 (Slightly larger than 150)
1
150
KEY, Hex, 3/16"
1
160
KEY, Hex, 1/8"
1
BOLTS, Hex Head Lag, 5/16" x 2-1/2"
(Required, not supplied)
8
WASHER, Flat, Machine, 5/16" (Required, not
supplied)
8
Figure 1: Parts
(10)
(20)
(30)
(40)
(80)
(90)
(100)
(110)
(120)
(130)
(140)
(150)
(160)
(50)
(60)
(70)