Chief Manufacturing PSH-2000 - Manual (Page 4)

Model: PSH-2000 Installation Instructions
4
ASSEMBLY AND INSTALLATION
NOTE: Read the Warnings and Cautions on page 2.
INSTALL MOUNTING BUTTONS
Installation of the mounting buttons is dependent on your
specific display. Three options are provided:
• Akira 84" and Orion 84" displays
• Modular 84" displays
• Other large flat panel displays
AKIRA 84" AND ORION 84" DISPLAYS
1. Using key (140), insert screw (80) through button (90)
and install into threaded mounting hole on back of
display (See Figure 2). Tighten securely.
2. Repeat for remaining five buttons.
Figure 2: Akira 84" and Orion 84" Mounting Button
MODULAR 84" DISPLAYS
NOTE: Modular displays are four independent displays
attached together within a single frame. The
assembly performs as a single display.
1. Insert screw (80) through button (90) and frame on
back of modular display (See Figure 3)(See Figure 4).
Using key (140) and 13mm wrench, install washer
(100), washer (110), and nut (120). Tighten securely.
2. Repeat for remaining five buttons.
Figure 3: Modular Display Frame
Figure 4: Modular 84" Mounting Button
OTHER LARGE FLAT PANEL DISPLAYS
1. Install the optional interface bracket to display
according to the instructions provided with the
interface bracket.
NOTE: Mounting buttons are pre-installed on optional
interface bracket. PSH-2000 items (80) through
(120), and key (140)(See Figure 1), will not be
used with optional interface bracket.
Install buttons (90) at these
6 mounting hole locations.
(80)
(90)
Mounting Hole
Install buttons (90) at these
6 mounting hole locations.
(80)
(90)
(100)
(110)
(120)
Modular
Frame