Hudson Medical 2 Sport-Lite - Manual (Page 2)

Molded Foam Core with (PST)
Progressive Support Technology
PST produces the right degree of cushion
firmness. Smaller, lightweight clients receive
a softer more compliant cushion, average
weight clients a medium firmness and larger
heavier clients receive a firmer more support-
ive cushion. The unique construction of high
resilient (HR) molded foam provides maximum
stabilization, positioning, pressure relief and
correct seating posture.
Poly-Lite™ Pressure Relief Bladders
The inner liner membrane has bladders
filled with Poly-Lite™. A unique proprietary
super lightweight microspherical polymer that
provides the lowest pressure readings while
seated reducing the likelihood of pressure
sores. Poly-Lite™ weights 25% the weight of
gel, silicone or water and will not freeze, heat
up, evaporate, dry out, harden, separate,
bottom-out, support a flame and is non-toxic.
Sport-Lite™ Cover
Outer cover is a removable, washable,
flame retardant, stretch polyester knit to
reduce interface pressure and shearing. It is
constructed with a vapor permeable moisture
proof urethane backing and a non-slip bottom
for comfort and safety.
Designed to Maximize Pressure Relief,
Skin Protection and Comfort.
Firmness Cushion Width
Soft 10" to 14"
Medium 16" to 18"
Firm 20" to 24"
PST SIZE RANGES
HUDSON
Units/ Medicare Weight
Item No. Size Case Code Capacity Warranty
268662 16” x 16” x 2” 1 E2603 250 18 Months
268682 16” x 18” x 2” 1 E2603 250 18 Months
268602 16” x 20” x 2” 1 E2603 250 18 Months
268862 18” x 16” x 2” 1 E2603 250 18 Months
268882 18” x 18” x 2” 1 E2603 250 18 Months
268802 18” x 20” x 2” 1 E2603 250 18 Months
268062 20” x 16” x 2” 1 E2603 250 18 Months
268082 20” x 18” x 2” 1 E2603 250 18 Months
268002 20” x 20” x 2” 1 E2603 250 18 Months
268282 22” x 18” x 2” 1 E2604 300 18 Months
268482 24” x 18” x 2” 1 E2604 300 18 Months
Cover Warranty: 3 Months
The Sport-Lite™ Wheelchair Cushion
is Available in the Following Sizes:
Flexible Moisture Proof
Poly-Lite™ Bladder.
Radio Frequency
Seals to Prevent
Leakage.
Air Vents on Each Side to Evacuate Contained Air
in the Molded Foam Base While Sitting for Comfort.
Leg Abduction Post
Prevents Leg Rotation
and Abrasion.
Molded Cavity
for Poly-Lite™
Bladder.
High Density Molded Urethane Foam
for Positioning, Support and Comfort.
SPORT-LITE SPORT-LITE
2” Wheelchair Cushion
™
Use and Application of Sport-Lite™ Cushion
for Positioning, Pressure Relief & Comfort
The Pressure EEZ® Sport-Lite™ Cushion with Poly-Lite™ reduces the
likelihood of pressure sores by reduction of pressure while positioning for
comfort and safety. Ideally suited for active clients who demand the ultimate
in performance from a light weight and contoured seat cushion. The
Poly-Lite™ cushion is recommended for use with a sling (curved) seat base.
Equalization of Pressure
The Pressure EEZ® Sport-Lite™ Cushion is manufactured with a flexible
urethane membrane casing with bladders of new Poly-Lite™; a unique super
lightweight microspherical polymer gel (weighs 1/4 the weight of silicone or
any other aqueous based gel) that has been radio frequency sealed for
strength and to prevent leakage. The Poly-Lite™ bladders are strategically
placed in the coccyx, ischial tuberosity and thigh area to reduce pressure
and allow capillary blood flow.
Positioning for Comfort and Safety
The Pressure EEZ® Sport-Lite™ Cushion is uniquely designed using a high
resilient (HR), custom molded foam core that positions the body in the
correct seating posture, provides a leg abduction post to prevent leg
rotation and abrasion. The Sport-Lite™ is strategically contoured to provide
optimum seating posture. The Sport-Lite™ with Poly-Lite™ remains cool and
combined with the breathable moisture barrier cover, the body remains
cool, dry and comfortable.