Instrument panel dimmer, Flash to pass, High beam operation – Jeep 2013 Patriot - User Guide User Manual

Page 23: Fog lights, Turn signals/lane change assist, Operating your vehicle

Advertising
background image

Instrument Panel Dimmer

• Rotate the center portion of the lever to the extreme bottom position to fully dim

the instrument panel lights and prevent the interior lights from illuminating when
a door is opened.

• Rotate the center portion of the lever up to increase the brightness of the

instrument panel lights when the parking lights or headlights are on.

• Rotate the center portion of the lever upward to the next detent position to

brighten the odometer and radio controls when the parking lights or headlights are
on.

• Rotate the center portion of the lever upward to the last detent to turn on the

interior lighting.

Flash To Pass

• Pull the lever toward you to activate the high beams. The high beams will remain

on until the lever is released.

High Beam Operation

• Push the lever forward to activate the high beams.

NOTE:
For safe driving, turn off the high beams when oncoming traffic is present to prevent
headlight glare and as a courtesy to other motorists.

Fog Lights

• Turn on the parking lights or low beam headlights and pull out the end of the lever.

Turn Signals/Lane Change Assist

• Tap the lever up or down once and the turn signal (right or left) will flash three

times and automatically turn off.

OPERATING YOUR VEHICLE

21

Advertising