KMC Controls STE-8000 series - Manual (Page 3)

Room setpoints are changed using the buttons and
display on the front of the sensor.
1. Press any button to begin changing setpoints.
2. If required, enter Password 1. New installations do
not have a password.
3. When the display advances to the cooling setpoint,
press the up or down button to change the
cooling setpoint.
4. Press the setpoint
Set Point
button to save the cooling
setpoint and advance to the heating setpoint.
5. Press the button to save the value or advance to
the next function.
6. When the display advances to the heating setpoint,
press the up or down button to change the
heating setpoint.
7. Press the setpoint
Set Point
button to save the heating
setpoint and return to the temperature display.
Set
Point
7O
12O2
Changing room setpoints