Kontron CP346 - Manual (Page 63)

CP346 Rear I/O Modules
ID 27253, Rev. 03 © 2005 Kontron Modular Computers GmbH Page 5 - 9
P R E L I M I N A R Y
5.1.4 Technical Specifications
Table 5-3: CP-RIO3-46 Technical Specifications
CP-RIO3-46 SPECIFICATIONS
Serial I/O Standards RS232
Channels Four serial I/O channels
Data Rates Maximum: 115.2 kBaud, asynchronous
Programmable
Data Formats Data Bits: 5 to 8
Parity: Odd, even, none, mark, space
Stop Bits: 1, 1.5, or 2
Flow Control: None, Xon/Xoff, hardware
Channel Mode RS232
External Board Interfaces 4 x RJ45 connectors
LEDs 8 operation indicator LEDs, two for each channel:
• Yellow
RxD
• Green TxD
The same LEDs are repeated on the mainboard’s front panel.
Electrical Parameters • Overvoltage protection: ±12 V
• Power supply: 5 V DC +5%, -3%
• Power consumption: 280 mA *
* At 5V DC inclusive CP346-RIO mainboard
General Parameters Temperature Ranges:
•
0°C to +70°C (operation, standard)
• -40°C to +85°C (operation, extended)
• -55°C to +125°C (storage)
Humidity: 0..90%, non-condensing
Dimensions: 80mm x 100mm
Weight: 95g approximately