Kontron CP6002 uEFI BIOS - Manual (Page 11)

CP6002 uEFI BIOS Starting uEFI BIOS Setup
ID 1039-1612, Rev. 2.0 Page 5
1.2 Navigation
The CP6002 uEFI BIOS setup program uses a hot key-based navigation system. A hot key leg-
end is located in the right frame on most setup screens.The following table provides information
concerning the usage of these hot keys.
HOT KEY DESCRIPTION
<F1> The <F1> key is used to invoke the General Help window.
<F2> The <F2> key is used to restore the previous values.
<F3> The <F3> key is used to load the optimized defaults.
<F4> The <F4> key is used to save the current settings and exit the uEFI BIOS Setup.
← →
Left/Right The Left and Right <Arrow> keys are used to select a major Setup screen.
For example: Main Screen, Boot Screen, Security Screen, etc.
↑ ↓
Up/Down The Up and Down <Arrow> keys are used to select a Setup function or a sub-screen.
+ -
Plus/Minus The Plus and Minus <Arrow> keys are used to change the field value of a particular Setup
function, for example, system date and time.
<ESC> The <ESC> key is used to exit a menu or the uEFI BIOS Setup.
Pressing the <ESC> key in a sub-menu causes the next higher menu level to be displayed.
When the <ESC> key is pressed in a major Setup menu, the uEFI BIOS Setup is terminated
without saving any changes made.
<Enter> The <Enter> key is used to execute a command or select a menu.