Kontron CP6002 uEFI BIOS - Manual (Page 19)

CP6002 uEFI BIOS Main Setup
ID 1039-1612, Rev. 2.0 Page 13
2.4.3.2 Console Redirection Settings
This screen provides information about functions for specifying the console redirection config-
uration settings for the Out-of-Band Management / Windows Emergency Management Servic-
es (EMS).
2.4.3.2.1 Out-of-Band Mgmt Port
This function is used to select the serial port intended for use with Out-of-Band Management.
This functionality is independent from serial redirection of other console output.
Default setting: COM0
2.4.3.2.2 Terminal Type
Default setting: VT-UTF8
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Main Boot Security Save & Exit
Out-of-Band MgmtPort [COM0]
Terminal Type [VT-UTF8]
Bits per second [115200]
Flow Control [None]
Data Bits 8
Parity None
Stop Bits 1
 : Select Screen
 : Select Item
Enter: Select
+/-:
Change Opt.
F1: General Help
F2: Previous Values
F3 Optimized Defaults
F4: Save
ESC: Exit
Version 2.01.1204. Copyright (C) 2010 American Megatrends, Inc.
SETTING DESCRIPTION
COM0 Use this setting to specify that the serial port 0 is to be used with Out-of-Band Management.
COM1 Use this setting to specify that the serial port 1 is to be used with Out-of-Band Management.
SETTING DESCRIPTION
VT100 Use one of these settings to select the terminal type for out-of-band management.
VT100+
VT-UTF8
ANSI