Kontron CP6002 uEFI BIOS - Manual (Page 29)

CP6002 uEFI BIOS Chipset Setup
ID 1039-1612, Rev. 2.0 Page 23
3.1.1.1 SATA Mode Selection: IDE
This screen provides functions for enabling/disabling of the SATA controllers and for selecting
the operational mode if enabled.
The following screen indicates the functions available when the SATA controllers are enabled
and the IDE mode is selected.
3.1.1.1.1 SATA Controller(s)
This function is used to enable or disable the onboard SATA controllers.
Default setting: Enabled
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Main Chipset Boot Security Save & Exit
SATA Controller(s) [Enabled]
SATA Mode Selection [IDE]
Serial ATA Port 0 Empty
Software Preserve Unknown
SATA Speed Limit [No Limit]
Serial ATA Port 1 Empty
Software Preserve Unknown
SATA Speed Limit [No Limit]
Serial ATA Port 2 Empty
Software Preserve Unknown
SATA Speed Limit [No Limit]
Serial ATA Port 3 Empty
Software Preserve Unknown
SATA Speed Limit [No Limit]
Serial ATA Port 4 INTEL SSDSA2SH (32.00)
Software Preserve SUPPORTED
SATA Speed Limit [No Limit]
Serial ATA Port 5 Empty
Software Preserve Unknown
SATA Speed Limit [No Limit]
 : Select Screen
 : Select Item
Enter: Select
+/-:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save
ESC: Exit
Version 2.01.1204. Copyright (C) 2010 American Megatrends, Inc.
SETTING DESCRIPTION
Disabled Use this setting to disable the SATA controllers.
Enabled Use this setting to enable the SATA controllers.