6 match cos, 7 match secondary-cos, Match cos - 10 – Kontron AT890X Full-Size CLI User Manual
Page 176: Match secondary-cos - 10
Quality of Service (QoS) Commands
AT8901/2/3
AT8901/2/3 CLI Reference Manual
Page 4 - 10
Format
match class-map <refclassname>
Mode
Class-Map Config
NOTE:
•
The parameters
<refclassname>
and
<class-map-name>
can not be the same.
•
Only one other class may be referenced by a class.
•
Any attempts to delete the
<refclassname>
class while the class is still referenced
by any
<class-map-name>
fails.
•
The combined match criteria of
<class-map-name>
and
<refclassname>
must be
an allowed combination based on the class type.
•
Any subsequent changes to the
<refclassname>
class match criteria must main-
tain this validity, or the change attempt fails.
•
The total number of class rules formed by the complete reference class chain
(including both predecessor and successor classes) must not exceed a platform-
specific maximum. In some cases, each removal of a refclass rule reduces the max-
imum number of available rules in the class definition by one.
4.3.5.1
no match class-map
This command removes from the specified class definition the set of match conditions
defined for another class. The
<refclassname>
is the name of an existing DiffServ
class whose match conditions are being referenced by the specified class definition.
Format
no match class-map <refclassname>
Mode
Class-Map Config
4.3.6
match cos
This command adds to the specified class definition a match condition for the Class of
Service value (the only tag in a single tagged packet or the first or outer 802.1Q tag of
a double VLAN tagged packet). The value may be from 0 to 7.
NOTE: This command is not available on the Broadcom 5630x platform.
Default
none
Format
match cos <0-7>
Mode
Class-Map Config
4.3.7
match secondary-cos
This command adds to the specified class definition a match condition for the
secondary Class of Service value (the inner 802.1Q tag of a double VLAN tagged
packet). The value may be from 0 to 7.
NOTE: This command is not available on the Broadcom 5630x platform.
Default
none
Format
match secondary-cos <0-7>
Mode
Class-Map Config