Kontron AT8402 User Manual - Manual (Page 24)

AT8402 Introduction
Page 1 - 10 AT8402 User Guide
1.3 Software Support
The following table contains information related to software supported by the AT8402.
Table 1-3: AT8402 Software Specification
SPECIFICATIONS
General • Reliable field upgrades for all software components
• Dual boot images with roll-back capability
• Management via SNMP and Command Line Interface
• System access via TELNET, SSH and serial line
• Hot-Swap support (IPMI)
• Hot-Plug support for AMC modules (IPMI)
Ethernet/Bridging • Static link aggregation (IEEE 802.3ad) on any port combination
• Classic and rapid spanning tree algorithms supported (IEEE 802.1D, IEEE 802.1w)
• Quality Of Service on all ports (IEEE 802.1p)
• Full Duplex operation and flow control on all ports (IEEE 802.3x)
• Static MAC filtering
• Port Authentication (IEEE 802.1X)
• Auto negotiation of speeds and operational mode on all external GE interfaces
as well as on all base fabric interfaces
• Layer 2 multicast services using GARP/GMRP (IEEE 802.1p)
• VLAN support including VLAN tagging (IEEE 802.3ac), dynamic VLAN registration
with GARP/GVRP (IEEE 802.1Q) and Protocol based VLANs (IEEE 802.1v)
• Double VLAN tagging
• Port Mirroring
Applications • NTP client for retrieving accurate time and date information
• DHCP server
• Onboard event management
• Test and trace facilities
• POST (power on self tests) diagnostics
• Standards based SNMP implementation supporting SNMP v1, v2 and v3
for monitoring and management purposes
• IPMI based management of the onboard AMC slots (AMC.*)
• Persistent storage of configuration across restarts
• Support for retrieving and installing multiple configurations
QoS • CoS (Class of Service )
• DifffServ (Differentiated Services)
• ACL (Access Control List)