Kontron AT8402 User Manual - Manual (Page 61)

AT8402 Hardware Description
Page 3 - 28 AT8402 User Guide
3.2.3 GbE Ports
The GE1 and GE2 ports are connected to the front board's GbE switch. The GbE PHY device
is placed on the front board, the magnetics are integrated into the x4 RJ45 connector. The con-
nectors’ pinning is set to MDI-X mode.
Table 3-24: Fast Ethernet Management (RJ45) LEDs Signification
Speed LED (Yellow)
OFF 10BASE-T
ON 100BASE-TX
Status LED (Green)
OFF Link down
ON Link up and no activity
BLINK Link up and activity
Table 3-25: GbE Pin Assignment
Pin
Number
Signal
1 BI_DB+
2 BI_DB-
3 BI_DA+
4 BI_DD+
5 BI_DD-
6 BI_DA-
7 BI_DC+
8 BI_DC-