Kontron AT8402 User Manual - Manual (Page 63)

AT8402 Hardware Description
Page 3 - 30 AT8402 User Guide
3.2.5 Jumpers and JTAG Connectors
Five jumpers configure debug settings for JTAG operation in conjunction with the four headers
on the PCB top side. Details on JTAG operation are available as an application note upon re-
quest.
S9 STOR3_TX - Front Board
S10 STOR3_TX +
S11 STOR2_TX -
S12 STOR2_TX +
S13 STOR1_TX -
S14 STOR1_TX +
S15 STOR0_TX -
S16 STOR0_TX +
Housing Chassis Ground -
Table 3-29: Assignment of connector channels and expander ports
SAS Expander port
number
Connector Channel
9 STOR0
8 STOR1
7 STOR2
6 STOR3
Table 3-28: External 4x SAS Connector Pin Assignment (Continued)
Pin
Number
Signal Driven by