Kontron AT8404 User Manual
Page 20
Introduction
7
AT8404 User Guide
www.kontron.com
Inter
faces
Backplane (Zone 2)
•
Base channels 1 and 2: 1 x GbE (1000BASE-T)
•
Fabric channels 1 and 2: 1 x 10 GbE (XAUI)
•
Synchronization Clock: 2 x CLK 1/2/3 (A/B)
•
Update channels 0-3: APS Path
RTM (Zone 3)
•
7 generic RTM channels from each AMC Slot
•
2 SAS/SATA/FC interfaces for mass storage
•
1 GbE interface to front board switch
•
Serial port for Unit Computer management
•
Fast Ethernet for Unit Computer management
•
I2C IPMI connection
Front Panel
•
Serial port for Unit Computer management
Gen
er
al
Mechanical
•
8U form factor mechanically compliant to PICMG 3.0 and AMC.0
•
Single slot (6HP)
•
Up to four mid-size/single width AMC slots
•
or up to two mid-size/double width AMC slots
•
280 mm x 322 mm (11.024“ x 12.677“)
•
150 mm cut away in AMC area
•
Weight: 1.825 kg
Power Requirements
•
Typical: 40W
•
Maximum (4 AMCs and RTM): 210W
•
AMCs may consume up to 140W
•
Operating Voltage: -38 to -72 VDC
Temperature
Designed to meet or exceed the following (Characteristics without AMCs):
•
Air Flow: 30 CFM min
•
Operating: 0°C to +55°C (32°F to 131°F)
•
Non-operating: -40°C to +70°C (-40°F to 158°F)
Table 1-2:
AT8404 Main Specifications
AT8404
SPECIFICATIONS