Introduction, 986lcd-m family – Kontron 986LCD-M-mITX (BGA) User Manual
Page 7
986LCD-M Family
KTD-N0837-B
Public
User Manual
Date: 2012-04-17
Page
7 of 91
1. Introduction
This manual describes the 986LCD-M/Flex, 986LCD-M/ATXP, 986LCD-M/ATXE and 986LCD-M/mITX
boards made by KONTRON Technology A/S. The boards will also be denoted 986LCD family if no
differentiation is required.
All boards are to be used with the Intel® Core™Duo, Intel® Core™ 2 Duo, Intel® Core™Solo and Celeron®
M Processors. These belong to the Intel Yonah and Merom processor families.
Use of this manual implies a basic knowledge of PC-AT hard- and software. This manual is focused on
describing the 986LCD Board’s special features and is not intended to be a standard PC-AT textbook.
New users are recommended to study the short installation procedure stated in chapter 3 before switching-on
the power.
All configuration and setup of the CPU board is either done automatically or by the user in the CMOS setup
menus. Except for the CMOS Clear jumper, no jumper configuration is required.