11 advanced settings – remote access configuration, 986lcd-m family – Kontron 986LCD-M-mITX (BGA) User Manual
Page 77
986LCD-M Family
KTD-N0837-B
Public
User Manual
Date: 2012-04-17
Page
77 of 91
8.3.11 Advanced settings – Remote Access Configuration
BIOS SETUP UTILITY
Advanced
Configure Remote Access type and parameters
Select Remote Access
type.
<- Select Screen
|| Select Item
+- change option
F1 General Help
F10 Save and Exit
ESC Exit
Remote Access [Enabled]
Serial port number [COM1]
Base Address, IRQ [3F8h, 4]
Serial Port Mode [115200 8,n,1]
Flow Control [None]
Redirection After BIOS POST [Always]
Terminal Type [ANSI]
VT-UTF8 Combo Key Support [Enabled]
Sredir Memory Display Delay [No Delay]
V02.59+ (C)Copyright 1985-2005, American Megatrends, Inc.
Feature
Options
Description
Remote Access
(Settings below not displayed if
Remote Access is disabled)
Disabled
Enabled
Allows you to see the screen over the
comport interface, in a terminal window
Serial port number
COM1
COM2
Setup which comport that should be used for
communication
Serial Port Mode
115200 8 n 1
57600 8 n 1
38400 8 n 1
19200 8 n 1
9600 8 n 1
Select the serial port speed
Flow Control
None
Hardware
Software
Select Flow Control for serial port
Redirection After BIOS POST
Disabled
Boot Loader
Always
How long shall the BIOS send the picture
over the serial port
Terminal Type
ANSI
VT100
VT-UTF8
Select the target terminal type
VT-UTF8 Combo Key Support
Disabled
Enabled
Setup VT-UTF8 Combo Key
Sredir Memory Display Delay
No Delay
Delay 1 sec
Delay 2 sec
Delay 4 sec
Gives the delay in seconds to display memory
information.