3 advanced settings – lan configuration, 986lcd-m family – Kontron 986LCD-M-mITX (BGA) User Manual
Page 70
986LCD-M Family
KTD-N0837-B
Public
User Manual
Date: 2012-04-17
Page
70 of 91
Feature
Options
Description
Hard Disk Write Protect
Disable
Enabled
Enable write protection on HDDs, only works
when it is accessed through the BIOS
IDE Detect Time Out (Sec)
0, 5, 10, 15, 20, 25, 30, 35 Select the time out value when the BIOS is
detecting ATA/ATAPI Devices
ATA(PI) 80Pin Cable
Detection
Host & Device
Host
Device
Select the mechanism for detecting 80Pin ATA
(PI) Cable
Staggered Spin-up delay Disabled
Spin-up delay in seconds between each of the
SATA drives. Drives must be proper strapped
as well.
8.3.3 Advanced settings – LAN Configuration
BIOS SETUP UTILITY
Advanced
LAN Configuration
Control of Ethernet
Devices and RPL/PXE
boot
<- Select Screen
|| Select Item
+- change option
F1 General Help
F10 Save and Exit
ESC Exit
ETH1 Configuration [Enabled]
MAC Address :00E0F4000001 100Mb*
ETH2 Configuration (Upper) [Enabled]
MAC Address :00E0F4000002
ETH3 Configuration (Lower) [Enabled]
MAC Address :00E0F4000003
V02.59+ (C)Copyright 1985-2005, American Megatrends, Inc.
* If link then speed is displayed (10Mb, 100Mb or 1000Mb)
Feature
Options
Description
ETH1 Configuration
Disabled
Enabled
With RPL/PXE boot
Select if you want to enable the LAN adapter, or
if you want to activate the RPL/PXE boot rom
ETH2 Configuration
Disabled
Enabled
With RPL/PXE boot
Select if you want to enable the LAN adapter, or
if you want to activate the RPL/PXE boot rom
ETH3 Configuration
Disabled
Enabled
With RPL/PXE boot
Select if you want to enable the LAN adapter, or
if you want to activate the RPL/PXE boot rom