Canon 850 IS - Manual (Page 110)

108
LCD monitor
Camera screen is black at start-up
Incompatible image has
been selected as the
start-up image in the My
Camera settings. Change the start-up image in the My
Camera settings
(p. 104) or use the
supplied software program
ZoomBrowser EX or ImageBrowser
to restore the default settings.
The display darkens.
The image in the LCD
monitor will darken in
strong sunlight or bright
light. This is a normal occurrence in
devices containing CCDs and does
not constitute a malfunction. (This
image will not be recorded when
shooting still images, but it will be
recorded when shooting movies.)
Display flickers.
Display flickers when
shot under fluorescent
lighting. This is not a camera malfunction
(flickering recorded in movies, but
not in still images).
A bar of light (red, purple) appears on the LCD monitor.
This may occur when
shooting a bright subject,
such as the sun or a light. This is a normal occurrence in
devices containing CCDs and does
not constitute a malfunction. This bar
of light will not be recorded when
shooting still images, but it will be
recorded when shooting movies.
appears.
A slow shutter speed has
likely been selected
because of insufficient
lighting. Set IS mode to a setting other than
[Off]
(p. 32) .
Raise the ISO speed (p. 65) or set
the flash to any setting other than
( flash off) (Basic Guide p. 14), or
secure the camera to something,
such as a tripod.