Canon 850 IS - Manual (Page 69)

S
h
oo
ting
67
You can check whether the image is in focus right after it is recorded.
To Cancel Checking the Focus
Press the shutter button halfway.
You can delete an image by pressing the button while
the image is displayed, except in the display position
change mode (See Basic Guide, p.19).
Pressing the DISP. button will change the display on the
LCD monitor as follows.
Focus Confirmation Detailed No Information
Checking for Focus Right After Shooting
Shooting Mode
1 Shoot.
The recorded image displays for about 2 seconds (or the
interval set with the Review function p.24 ).
2
Press (or ) while the
image is displayed.
The number of times the DISP. but-
ton is pressed depends upon the
display settings for the LCD monitor
(See below). Press the DISP. button
repeatedly until the screen at the
right appears.
Displays as follows.
- Camera is focused: AF frame for the image that has been
shot displays in white, and an orange frame appears
within the focused frame.
- Camera is not focused: Image that has been shot displays,
and an orange frame displays at the center of the image.
- Contents of the orange frame can be confirmed at the bot-
tom right.
- Zoom can also be used (p. 73) .
You can switch between AF frames and change the display
position (p. 68) using the MENU button or the FUNC./SET
button.
Recorded Image
Orange frame contents