Kontron KTHM76-mITX - Manual (Page 113)

KTQM77 – KTHM76 Users Guide
KTD-N0850-F Page 113
10.3.2 System Agent (SA) Configuration
Note 1: Only present if Ivy Bridge CPU is used.
Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc.
Chipset
System Agent Bridge Name
System Agent Bridge Name
VT-d Capability
VT-d
CHAP Device (B0:D7:F0)
Thermal Device (B0:D4:F0)
Enable NB CRID
BDAT ACPI Table Support
C-State Pre-Wake
► Graphics Configuration
► DMI Configuration
►
NB PCIe Configuration
► Memory Configuration
► Memory Thermal Configuration
► GT – Power Management Control
IvyBridge
1.5.0.0
Supported
[Enabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Enabled]
Check to enable VT-d function
on MCH.
→← : Select Screen
↑↓ : Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.15.1226. Copyright © 2012 American Megatrends, Inc
Function Selection Description
VT-d
Disabled
Enabled
Check to enable VT-d function on MCH.
CHAP Device (B0:D7:F0)
Enabled
Disabled
Enable or disable SA CHAP Device.
Thermal Device (B0:D4:F0)
Enabled
Disabled
Enable or disable SA Thermal Device.
Enable NB CRID
Enabled
Disabled
Enable or disable NB CRID Workaround.
BDAT ACPI Table Support
Enabled
Disabled
Enables support for the BDAT ACPI Table.
C-State Pre-Wake
(Note1) Enabled
Disabled
Controls C-State Pre-Wake feature for ARAT, in
SSKPD[57]
BIOS - Chipset