Kontron KTHM76-mITX - Manual (Page 117)

KTQM77 – KTHM76 Users Guide
KTD-N0850-F Page 117
Function Selection Description
Primary IGFX Boot Display
VBIOS Default
CRT (DVI-A, default 1)
EFP (DVI-D, default 1)
LFP (LVDS display)
EFP3 (DP2 display)
EFP2 (DP1, default 2)
LFP2
Select the Video Device which will be
activated during POST.
This has no effect if external graphics
present.
Secondary boot display selection will
appear based on your selection.
VGA modes will be supported only on
primary display.
LCD Panel Type
VBIOS Default
640x480 LVDS
800x600 LVDS
1024x768 LVDS1
1280x1024 LVDS
1400x1050(RB) LVDS1
1400x1050 LVDS2
1600x1200 LVDS
1366x768 LVDS
1680x1050 LVDS
1920x1200 LVDS
1440x900 LVDS
1600x900 LVDS
1024x768 LVDS2
1280x800 LVDS
1920x1080 LVDS
2048x1536 LVDS
Select LCD panel used by Internal
Graphics Device by selecting the
appropriate setup item.
SDVO-LFP Panel Type
VBIOS Default
1024x768 SDVO-LFP
1280x1024 SDVO-LFP
1400x1050 SDVO-LFP
1600x1200 SDVO-LFP Select SDVO panel used by Internal
Graphics Device by selecting the
appropriate setup item.
Panel Scaling
Auto
Off
Force Scaling
Select the LCD panel scaling option used
by Internal Graphics Device.
Backlight Control
PWM Inverted
PWM Normal
GMBus Inverted
GMBus Normal
Backlight Control Setting
BIA
Auto
Disabled
Level 1
Level 2
Level 3
Level 4
Level 5
Auto: GMCH use VBT defaults.
Level n: Enabled with selected
Aggressiveness
Level.
Spread Spectrum clock
Chip
Off
Hardware
Software
Hardware: Spread is controlled by chip.
Software: Spread is controlled by BIOS.
BIOS - Chipset