15 advanced - lan configuration, Advanced - lan configuration, Bios - advanced – Kontron KTHM76-mITX User Manual
Page 97
KTQM77 – KTHM76 Users Guide
KTD-N0850-F Page 97
10.2.15 Advanced - LAN Configuration
Note: ETH2 Configuration (Upper) and ETH3 Configuration (Lower) are only present if using
KTQM77/mITX.
Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc.
Advanced
LAN Configuration
System UUID {f4af2da3-b59d-58a9-466cb11a02b0486f}
Control of Ethernet Devices and
PXE boot. To disable ETH1, ME
Subsystem must be as well.
ETH1 Configuration (Left)
Wake on LAN
MAC Address & Link status:
ETH2 Configuration (Upper)
MAC Address & Link status:
ETH3 Configuration (Lower)
MAC Address & Link status:
►
Network Stack
[Enabled]
[Enabled]
00E0F4288EA3+
[Enabled]
00E0F4288EA4-
[Enabled]
00E0F4288EA5-
→← : Select Screen
↑↓ : Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.15.1226. Copyright © 2012 American Megatrends, Inc
Function
Selection
Description
ETH1 Configuration (Left)
Disabled
Enabled
With PXE boot
Control of Ethernet Devices and PXE boot. To
disable ETH1, ME Subsystem must be as well.
Wake on LAN
Enabled
Disabled
Enable or disable integrated LAN to wake the
system. (The Wake On LAN cannot be disabled
if ME is on at Sx state.)
ETH2 Configuration
(Upper)
Disabled
Enabled
With PXE boot
Control of Ethernet Devices and PXE boot. To
disable ETH2, ME Subsystem must be as well.
ETH3 Configuration
(Lower)
Disabled
Enabled
With PXE boot
Control of Ethernet Devices and PXE boot. To
disable ETH3, ME Subsystem must be as well.
BIOS - Advanced