16 lan controller, 1 connector, Mopslcdlx user's guide – Kontron MOPSlcdLX User Manual
Page 29
KTD-S0005-C
Page 25
LAN Controller
MOPSlcdLX User's Guide
16 LAN Controller
The MOPSlcdLX uses an Intel
®
82551ER PCI Fast Ethernet controller. The controller support 10/100 Base-T
interfaces. The devices auto-negotiates the use of a 10 or 100 Mbps connection.
Additionally it is possible to enable the LAN PXE Boot in the BIOS Setup to allow the system to boot up via a
network connection from a PXE server.
16.1 Connector
The LAN interface is available through the connector X16000 (8 pins). To have the signals available on a
standard RJ45 connector you need an adapter cable which is offered by KONTRON (KAB-MOPS-ETN1, part
number 96048-0000-00-0).
Header
Pin
Signal Name
Function
1
TXD+
10/100 transmit (positive)
2
TXD-
10/100 transmit (negative)
3
RXD+
10/100 receive (positive)
4
GND
Ground (shield)
5
GND
Ground (shield)
6
RXD-
10/100 receive (negative)
7
GND
Ground (shield)
8
GND
Ground (shield)