Kontron MOPSlcdLX - Manual (Page 40)

KTD-S0005-C Page 36 Setup Guide
MOPSlcdLX User's Guide
21.6 Integrated Peripherals
Feature Option Description
Master/Slave Drive PIO
Mode
Auto, Mode 0, Mode 1
Mode 2, Mode 3, Mode 4
Selects HDD PIO mode or Auto for optimum
transfer mode
Master/Slave Drive UDMA Disabled
Auto
Disables UDMA or selects the optimum transfer
mode
Bus Master Mode Disabled
Enabled
Enables or disables IDE bus master mode
HDD Block Mode Disabled
Enabled
Enables or disables IDE block mode. If the
harddrive supports block mode select Enabled
for automatic detection of the optimal number
of block read/writes per sector
Keyboard Input Clock 6 , 8, 12, 16 MHz Selects the keyboard clock
Floppy Controller Disabled
Enabled
Enables or disables the floppy controller
Serial Port 1/2 Disabled
3F8/IRQ4 (Port 1)
2F8/IRQ3 (Port 2)
3E8/IRQ4
2E8/IRQ3
Selects I/O base and IRQ of serial port respec-
tively disables the port
Parallel Port Disabled
378/IRQ7
278/IRQ5
3BC/IRQ7
Selects I/O base and IRQ of serial port respec-
tively disables the port
Parallel Port Mode Standard
EPP
Standard = bidirectional
EPP = Enhanced Parallel Port specification
EPP Mode Select EPP1.9, EPP1.7 Selects the EPP specification
21.7 PnP/PCI Configurations
Feature Option Description
Init Display First Onboard
ISA Slot
PCI Slot
Defines the search strategy for the primary
graphic controller
Reset Configuration Data Disabled
Enabled
Enabled erases all configuration data in Exten-
ded System Configuration Data (ESCD)
Resources Controlled by Auto (ESCD)
Manual
Manual allows user configuration of PCI IRQs
First PCI IRQ
Second PCI IRQ
IRQ3, IRQ4, IRQ5, IRQ7
IRQ10 (First)
IRQ11 (Second)
IRQ12, IRQ15
The system BIOS must have two PCI IRQs. PCI
interrupts own the highest priority and dis-
abling legacy (ISA) IRQs, also internal serial
and parallel ports