Kontron PCI-760 User Manual
Page 30
9. Jumpers and Connectors Overview
28
PCI-760 – User’s Guide (V1.10)
9.1.3.12.
J13, J19 and J10: USB Extension
Each of the onboard boxed 10-pin-header for USB extension (J13, J19 and J10) supports two USB ports (Port 4 and
Port 5 / Port 8 and Port 9 / Port 10 and Port 11). Pin 9 is removed for keying purposes. (A slot bracket with 2x USB type
A connectors can be ordered separately.)
The PCI-760 board supports twelve USB ports (USB0-USB11).
•
J29 (USB7) and J30 (USB6) are available on the slot bracket.
•
J13 (USB4 and USB5), J19 (USB8 and USB9) and
•
J10 (USB10 and USB11) are on board
(J10 is used for the connection of the optional USB Flash Module;
refer to the subsection 9.1.2.5
“JP10: Enable/Disable the HDACT# LED for the USB Flash Module")
•
USB0, USB1, USB2and USB3 are routed to the backplane via the PICMG 1.3 edge connector.
USB Port 5
USB Port 4
Pin # Signal Name
J13: Boxed Header
DIP 10-pin
Pin # Signal Name
1
VCC fused
2
VCC fused
3 D5-
4 D4-
5 D5+
6 D4+
7 GND
8 GND
9 Key
1
9
2
10
10 NC
USB Port 9
USB Port 8
Pin # Signal Name
J19: Boxed Header
DIP 10-pin
Pin # Signal Name
1
VCC fused
2
VCC fused
3 D9-
4 D8-
5 D9+
6 D8+
7 GND
8 GND
9 Key
1
9
2
10
10 NC
USB Port 11
USB Port 10
Pin # Signal Name
J10: Boxed Header
DIP 10-pin
Pin # Signal Name
1
VCC fused
2
VCC fused
3 D11-
4 D10-
5 D11+
6 D10+
7 GND
8 GND
9 Key
1
9
2
10
10
Refer to the subsection 9.1.2.5 „JP10:
Enable/Disable the HDACT# LED for the USB Flash