Kontron PCI-760 - Manual (Page 73)

10. AMI BIOS Configuration
PCI-760 – User’s Guide (V1.10) 71
If a Supervisor Password is installed two options are available:
“User Access Level” with following settings: Full Access , Limited, View Only, and No Access.
“Password Check” with following settings: Setup and Always.
10.6.2.2. Change User Password
Select this option and press <Enter> to access the sub menu.
You can use the sub menu to change the user password. Select Change User Password from the Security Setup menu
and press <Enter>.
“Enter New Password:” input field appears. Valid password can be a 1 to 6 alphanumeric characters combination. Type
the password and press <Enter>. The screen does not display the characters entered. “Confirm New Password:” input
field appears. Retype the password as prompted and press <Enter>. If the password confirmation is incorrect, an error
message appears. The password is stored in NVRAM.
If a User Password is installed are available the “Clear User Password” option: