Chicago Electric HVLP-ELECTRIC 97750 - Manual (Page 8)

Page 8 SKU 97750 For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
Electrical
Requirements
120 V~ / 60 Hz / 450 Watts
5.5 Amps (Start Up)
3.3 Amps (Load & No Load)
Motor Speed: 30,000 RPM
Power Plug: 2-Prong
Power Switch: ON/OFF Rocker
Spray Cup Capacity 1 Quart
Output Pressure 1.45 to 4.35 PSI
Activation Method Trigger Style
Fluid Control Knob
Clockwise (For round pattern)
Counterclockwise (For flat pattern)
Air Control Adjustable Lever
Adjustable Spray
Patterns
Horizontal (2.0” H x 6-1/4” W)
Vertical (6-1/4” H x 2.0” W)
Round (2-1/2” Diameter)
Product Limitations
Not recommended for use with latex
and other water-based paints.
Construction Materials
Polypropylene Housing
Rubber/Thermoplastic Hose
Brass Needle & Knob
Aluminum Paint Cup & Nozzle
Sheet Steel Trigger
Polyester Shoulder Strap
Die Cast Aluminum Spray Gun
uNPACKINg
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at the number
shown on the cover of this manual as soon
as possible.
PROduCT FEATuRES
Read the ENTIRE IMPORTANT
SAFETY INFORMATION section
at the beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
TO PREVENT
SERIOuS INjuRY
FROM ACCIdENTAL
OPERATION:
Turn the Power Switch (33) of
the Paint Sprayer to its “OFF”
position and unplug the tool
from its electrical outlet
before assembling, operating,
or making any adjustments to
the tool.
Note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
FIguRE A
POWER SWITCH
(33)
AIR CONTROL LEVER
(13)
FLuId CONTROL SCREW
(19)
TRIggER
(6)
AIR
NOZZLE
(4)
CuP
(27)
AIR HOSE
(31)
MOTOR
(32)
PREPARATION
IMPORTANT: Due to the viscosity of 1.
latex and other water-based paints,
they are NOT recommended for use
with this HVLP Paint Sprayer.