Kontron COMe-cPC2 - Manual (Page 101)

COMe-cPC2 / BIOS Operation
North Bridge Configuration
Feature Option Description
DRAM Frequency Auto
800Mhz
1067Mhz
Selects the DRAM frequency
Configure DRAM Timing by SPD Disabled
Enabled Disables and Enables automatic DRAM configuration via
SPD EEPROM
TMRC Mode Disabled
Enabled Disables and Enables the thermal memory reference
code.
TM Lock Disabled
Enabled
Disables and Enables the Thermal Sensor on Lock.
TS on DIMM Disabled
Enabled
Disables and Enables the Thermal Sensor on DIMM.
Boots Graphic Adapter Priority IGD
PCI/IGD
PCI/PEG
PEG/IGD
PEG/PCI
Selects which graphics adapter is initialized during boot
up and gets priority
Internal Graphics Mode Select Disabled
Enabled, 32MB
Enabled, 64MB
Enabled, 128MB
Select the mode for the interal graphicdevice
Max TOLUD 3G Bytes
2.5G Bytes
2G Bytes
Maximum value of “top of low usable DRAM”
Gfx Low Power Mode Disabled
Enabled
Disables and Enables the low power mode for the
internal graphics device
PEG Port Auto
Disabled
Enable PEG Port Always
Selects the initialization mode of the PCIexpress
graphics port
101