Storage, Connectivity, Ethernet – Kontron COMe-cPC2 User Manual
Page 13: Misc interfaces and features, Kontron features, Power features, Come-cpc2 / product specification
COMe-cPC2 / Product Specification
Storage
onboard SSD
-
SD Card support
-
IDE Interface
JMD330 SATA#3 to PATA
Serial-ATA
3x SATA 3Gb/s
SATA AHCI
NCQ, HotPlug, Staggered Spinup, eSATA, PortMultiplier
SATA RAID
0, 1
Connectivity
USB
8x USB 2.0
USB Client
-
PCI
PCI Rev 2.3 (33MHz/3.3V)
PCI External Masters
4
PCI Express
5x PCIe x1 Gen1
Max PCI Express
6x PCIe x1 without LAN
PCI Express x2/x4 configuration
YES
Ethernet
10/100/1000 Mbit
Ethernet controller
Intel® 82567 (Boazman)
It is also possible to run the 1st 4 x1 lanes as 1 x4 lane. For that please pull-up the signal A33 and A29 to 3.3V on the
baseboard.
Express Card hotplug functionality is only available, when in BIOS setup the PCIexpress
lane is switched from [AUTO] to [ENABLED]
Ethernet
The Intel® 82567 (Boazman) ethernet supports:
» Jumbo Frames
» MACsec IEEE 802.1 AE
» WOL (Wake On LAN)
» PXE (Preboot eXecution Environment)
Misc Interfaces and Features
Audio
HD Audio
Onboard Hardware Monitor
ON Semi ADT7475
Trusted Platform Module
iTPM 1.2 (integrated in ICH9M)
Miscellaneous
-
Kontron Features
External I2C Bus
Fast I2C
M.A.R.S. support
YES
Embedded API
JIDA16 / JIDA32 / PICMG EAPI
Custom BIOS Settings / Flash Backup
YES
Watchdog support
Single Staged
Power Features
Singly Supply Support
YES
Supply Voltage
8.5V - 18V
ACPI
ACPI 3.0
S-States
S0, S3, S4, S5
S5 Eco Mode
YES
Misc Power Management
DPST 4.3
13