Technical data, Environmental specifications – Kontron KISS Stor 1 User Manual
Page 56
Technical Data
KISS-Stor 1 – User’s Manual
55
Technical Data
KISS-Stor 1
Specifications
Host Interface
one SATA-I
Disk Interface
SATA-I (Support SATA-II but run in SATA-I)
RAID Levels
Supported
RAID level 1
Removable Drive
Carrier
2x SATA removable drive carrier
LED Indicators
2x disk activity LED indicators (red, yellow, green)
2x hard disk status / rebuilding indicators (red)
rebuilding indicators / error message indicators (row of
eight indicators)
Operating Element
Key to switch on/off the hard disks
Beeper Alarm
Yes, built-in buzzer on board
FAN
Rated speed: 4700RPM+/- 400RPM
Noise level: 35dB(A)
Hot Swap
Yes
(Rebuilding for RAID 1 is transparent & automatic)
Dimensions
W5.75 x D8.84 x H3.35 (inch)
W146 x D224.536 x H 85 (mm)
Weight
Approx. 1.8 kg (3.96 lbs.)
Environmental Specifications
Ventilation
cooling fan
Operating Temperature /
relative Humidity
0 … +50°C / 5 - 95 %, non-condensing
(32 … 122 °F / 5 - 95%, non-condensing)
Operating Altitude
3,048 m (10,000 ft)