Kontron CP307-V BIOS - Manual (Page 100)

OEM Feature CP307/CP307-V BIOS Guide
Page 90 ID 35978, Rev. 2.0
P R E L I M I N A R Y
CP307 REAR I/O GPIO SCREEN (only on Rear I/O Version)
This screen provides functions for specifying the CP307 Rear I/O GPIO configuration settings.
GPI0 - GPI4 Status
These functions are used to display the current signal level at the corresponding GPI pin. Pos-
sible settings are High and Low.
GPO0 - GPO2
Optimal and Fail-Safe default settings: Low
Note: The GPOs may change from low to high and back during the boot-up phase.
SETTING DESCRIPTION
High
Low Use one of these settings to select the boot-up default level at the corresponding pin.