Kontron CP307-V BIOS - Manual (Page 104)

OEM Feature CP307/CP307-V BIOS Guide
Page 94 ID 35978, Rev. 2.0
P R E L I M I N A R Y
Serial Port 1 SDO
This function is used to select the Serial Port 1 routing.
Note: This function is only effective on the CP307 rear I/O version.
Optimal and Fail-Safe default settings: Front
Gig. Ethernet 1 / Gig. Ethernet 2 SDO
This function is used to select the appropriate Gigabit Ethernet channel routing.
Note: This function is only effective on the CP307 rear I/O version.
Optimal and Fail-Safe default settings: Front
SETTING DESCRIPTION
Front Use this setting to specify that the Serial Port 1 is routed to the COM connector on the front
panel of the 8HP CP307.
Rear Use this setting to specify that the Serial Port 1 is routed to the rear I/O module.
SETTING DESCRIPTION
Front Use this setting to specify that the front Gigabit Ethernet connector is active.
Rear Use this setting to specify that the Gigabit Ethernet channel is routed to rear I/O.